DIGITAL DETECTING WATER TURBIDITY TSS SLUDGE CONCENTRATION TEMPERATURE SELF-CLEANING SENSOR FOR SEWAGE TREATMENT

Short Description:

Water turbidity, suspended matter, sludge concentration and temperature sensors are widely used in online monitoring of sewage in various industrial production processes and wastewater treatment processes, as well as online monitoring of turbidity, suspended matter, sludge concentration in various processes of sewage treatment plants.


Product Detail

Product Tags

Product Features

Product characteristics
■Sensor Body: SUS316L, Upper and lower covers PPS+fiberglass, corrosion-resistant, long service life, suitable for various sewage environments.
■Infrared scattered light technology, equipped with a scattered light receiver in the direction of 140°, the turbidity/suspended matter/sludge concentration value is obtained by analyzing the intensity of scattered light.
■ The measurement range is 0-50000mg/L/0-120000mg/L, which can be used for industrial wastewater or high turbidity sewage. Compared with the TSS sensor of 0-4000 NTU, there are more application scenarios.
■ Compared with traditional sensors, the sensor surface is very smooth and flat, and dirt is not easy to adhere to the lens surface. It comes with a brush head for automatic cleaning, no manual maintenance is required, saving time and effort.
■ It can RS485, multiple output methods with wireless modules 4G WIFI GPRS LORA LORWAN and matching servers and software for real-time viewing on the PC side.

Product Applications

This product is widely used for online monitoring of Turbidity/suspended solids/sludge concentration in various processes in sewage treatment plants; online monitoring of suspended solids (sludge concentration) in various industrial production processes and wastewater treatment processes.

Product Parameters

Measurement parameters

Product name

Water Turbidity TSS Sludge Concentration Temp Sensor

Measurement principle

Infrared scattered light

Measuring range

0-50000mg/L/0-120000mg/L

Accuracy

Less than ±10% of the measured value (depending on the homogeneity of the sludge) or
10mg/L, whichever is greater

Repeatability

±3%

Resolution

0.1mg/L, 1mg/L, depending on the range

Pressure range

≤0.2MPa

Main material of sensor

Body: SUS316L;
Upper and lower covers: PPS+fiberglass
Cable: PUR

Power supply

(9~36)VDC

Output

RS485 output, MODBUS-RTU protocol

Storage temperature

(-15~60) ℃

Operating temperature

(0~45) ℃ (no freezing)

Weigh

0.8kg

Protection level

IP68/NEMA6P

Cable length

Standard 10m cable, extendable to 100m

Class of protection

IP68/NEMA6P

Technical parameter

Output

4 - 20mA / Maximum load 750Ω
RS485(MODBUS-RTU)

Wireless transmission

Wireless transmission

LORA / LORAWAN(EU868MHZ,915MHZ), GPRS, 4G,WIFI

Provide cloud server and software

Software

1. The real time data can be seen in the software .

2. The alarm can be set according to your requirement.
3. The data can be download from the software.

FAQ

Q: How can I get the quotation?
A: You can send the inquiry on Alibaba or the below contact information, you will get the reply at once.

Q: What's the main characteristics of this sensor?
A: It is easy for installation and can measurement of osmotic pressure online with the RS485 output, 7/24 continuous monitoring.

Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.

Q: What’s the common power supply and signal output?
A: Common power supply and signal output is DC: 12-24V, RS485. The other demand can be custom made.

Q: How can I collect data?
A: You can use your own data logger or wireless transmission module if you have , we supply the RS485-Mudbus communication protocol.We can also supply the matched LORA/LORANWAN/GPRS/4G wireless module.

Q: Do you have the matched software?
A:Yes, we can supply the software , you can check the data in real time and download the data from the software, but it need use our data collector and host.

Q: What’s the standard cable length?
A: Its standard length is 5m. But it can be customized, MAX can be 1km.

Q: What's the lifetime of this Sensor?
A: Usually 1-2 years.

Q: May I know your warranty?
A: Yes, usually it’s 1 year.

Q:What’s the delivery time?
A: Usually, the goods will delivered be in 3-5 working days after receiving your payment. But it depends on your quantity.

Just send us an inquiry at the bottom or contact Marvin for more information, or get the latest catalog and competitive quotation.


  • Previous:
  • Next: